CUTTING SECTION

Cutting is one of the major process in garments manufacturing. Here garments parts are cutting according to the pattern. In garments cutting department, a process flow chart have to maintained to send the right measurement parts in the next process for making quality garments.

Each process of garments cutting flow chart is discussed shortly in the below table:

Sl No	Process	Job
01	Pattern received from pattern department	At first you have to received different sizes pattern for each style garments from the pattern department.
02	Garments cutting ratio received from merchandiser	Cutting ratio for each style garments should be received from merchandiser.
03	Marker Making	To complete cutting process in easy way, you have to make marker for each style garments.
04	Fabric received from the store	At the meantime, you have to receive fabrics from the store for each style of garments.
05	Fabric Checking	Here, fabrics have to checked and confirm the shade variation free fabrics in cutting table.
06	Fabric Spreading	When the above process is completed, then you have to spread the fabric with correct lay height and ply tension.
07	Marker placing on to the lay	After that, marker have to place on the top layer of the lay.
08	Cutting the fabric	Here, fabrics have to cut by maintaining marker.
09	Numbering	After cutting the fabrics, each parts of different style fabrics should be numbered to avoid mixing with the others style fabric parts.
10	Checking	Checking the cutting fabrics accurately by comparing with its marker.
11	Sorting and Bundling	Cutting parts should be sorting and bundling here to send easy into the next process.
12	Send to the next process	Cutting fabric parts have to send into next process (where required) like printing, Embroidery, sewing etc.

 https://web.facebook.com/shamimshihab

Conclusion: Skill-ness, technical knowledge and special ability to on technology of making garments are necessary for correct cutting. Special care is very essential here, because if any fault is occurred during cutting, the whole production is cancelled. So, we should have clear idea and sufficient knowledge on cutting should be very careful during cutting.