Sewing Machine

1.      Double chain stitch machine (four needle short……),

2.      Double chain stitch machine (four needle elastic inserting machine),

3.      Double chain stitch machine (double needle with reverse feed),

4.      Fed of the arm (double chain stitch machine with three needles),

5.      Interlock machine (twine needle, 5 – thread over lock machine),

6.      Lock stitch machine (single needle with variable top feed with automatic thread trimmer)

7.      Lock stitch machine (single needle with automatic thread trimmer),

8.      Lock stitch machine (single needle sewing machine),

9.      Lock stitch machine (two needle with split needle bar sewing),

10.  Lock stitch machine (twin needle feed),

11.  Lock stitch sewing machine (one needle with vertical trimmer wiper and reverse feed),

12.  Lap seaming machine (for back tape attaching),

13.  Linking machine,

14.  Over lock machine (twine needle four threaded machine),

15.  Over lock machine (one needle, 3 – thread),

16.  Zigzag sewing machine (one needle),

17.  Top and bottom cover stitch flatbed machine (three needle),

18.  Three needle covering machine, five thread flatbed top and bottom covering m/c,

19.  Button hole machine (for woven fabric),

20.  Button sewing machine,

21.  Bar tack machine with automatic thread trimmer,

22.  Button hole sewing machine (for knitted fabric),

23.  Button covering stitch belt loop making machine (kansai machine),

24.  Bias tape cutting machine,

25.  Label sewing machine.

Functions of each sewing machine parts have discussed in the below:

1.      Spool pin: The main function of spool pin is to hold the spool of thread.

2.      Bobbin binder spindle: During winding, bobbin is placed here.

3.      Bobbin winder stopper: When bobbin reaches its optimum capacity then bobbin winder stopper stops the bobbin winding.

4.      Stitch width dial: The main object of stitch width dial is to control the zigzag stitch.

5.      Pattern selector dial: Pattern selector dial is to set the symbol of the desired stitch pattern.

6.      Hand wheel: Hand wheel is used to raise and lower the need, which is situated in the right side of the machine.

7.      Stitch length dial: Stitch length dial is used to control the length of the stitch.

8.      Reverse stitch lever: The machine will sew in the reverse while the lever is pushed.

9.      Power switch: Power switch means the off-on office of the sewing machine. Normally power switch is located at the right side of the machine.

10.  Bobbin winder thread guide: These types of thread guide are used during bobbin winding.

11.  Thread tension dial: Thread tension dial is used to control the tension on the top thread.

12.  Thread take-up lever: During sewing the top thread passes through the thread take-up lever. Thread take-up lever moves up and down with the needle.

13.  Needle clamp screw: Needle clamp screw holds the needle in its actual place.

14.  Presser foot: Presser foot holds the fabric in its definite place.

15.  Bobbin cover: During sewing bobbin cover protects and covers the bobbin holder.

16.  Bobbin cover release button: This type of button is used to release the cover for entrance to the bobbin.

17.  Feed dog: During sewing, feed dog pulls the fabric in forward.

18.  Needle: Needle is used to form a stitch in the garments.

19.  Needle plate: Needle plate is a metal plate which is situated under the needle and presser foot. It helps to move the fabric forward during sewing.