The basic structure of sewing machine
is the same whether it is hand-operated sewing, treadle sewing machine or
electric sewing machine. The basic parts of a sewing are listed below and seen
in Fig.
Parts of a Sewing Machine
1. Spool pin: It is fitted on top of
the arm to hold the reel.
2. Thread guide: It holds the thread
in position from the spool to the needle.
3. Tension disc: The two concave
discs put together with the convex sides facing each other. The thread passes
between the two. The tension of the thread is adjusted by a spring and nut
which increases or decreases pressure
4. Take up lever: It is a lever
fitted to the body of the arm. Its up and down motion feeds the thread to the needle
and tightens the loop formed by the shuttle.
5. Needle bar: This is a steel rod to
hold the needle at one end with the help of a clamp. Its main function is to
give motion to the needle.
6. Bobbin case: This moves into
position to catch the top thread and form the stitch as the needle is lowered
into the bobbin chamber.
7. Presser foot: It is fixed to the
presser bar to hold the cloth firmly in position when lowered.
8. Presser foot lifter: A lever
attached to the presser bar for raising and lowering the presser foot.
9. Stitch regulator: This controls
the length of the stitch.
10. Bobbin winder: A simple mechanism
used for winding thread on the bobbin.
11. Fly Wheel: When this is made to
revolve, it works the mechanism of the motion
12. Clutch or Thumb Screw: This is in
the center of the fly wheel and it engages and disengages the stitching
mechanism.
13. Slide Plate: A rectangular plate,
which facilitates the removal of the bobbin case without lifting the machine.
14. Needle Plate or Throat Plate: A
semi-circular disc with a hole to allow the needle to pass through it.
15. Feed dog: This consists of a set
of teeth fitted below the needle plate. It helps to move the cloth forward
while sewing.
16. Face plate: A cover which on
removal gives access to the oiling points on the needle bar, presser bar and
take-up lever.
17. Spool pin for bobbin winding:
Spool of thread is placed on this at the time of bobbin winding
Comments
Post a Comment